Convenient Horizontal Injection Molding machine applied in produce
Air Condition Filter
- Multiple closed-loop monitoring device as standard transfer mode
electric eye, the analyte electric eye, speed electric eye, etc.
- The barrel feed thread is with cooling line available to connecting
cold water, in this way secure the material goes into barrel
- Virable Pump system make the out of the hydraulic system matching
the required power for entire machine operation without loss of
high pressure throttle and overflow energy.
- Low speed high torque motor are using on the inection unit to make
sure the screw powerful.
- The double-cylinder design injection unti makes the machine more
higher injection pressure , more simpler structure and lower
- Advantages of this Machine
- The standard series compact design and small footprint makes them
ideal for use in confined production environments.
- Our high precious hydraulic technical components make the machines
that comprehensively meet everyday requirements.
- Energy savings of up to 30 per cent can be achieved in the case of
medium cycle times.
- More demanding production processes can be implemented using the
three-station rotary tables type machine.
- Set-up can be performed quickly and without errors thanks to the
rapid-release coupling for the screw and the central connection of
all cylinder module supply units.
Vertical clamping horizontal injection clamping force is from 45T-
150T. It has horizontal with three sides
open and no standing piles. It is suittable for injection products
with large inserts.
■ Five points double toggle clamping unit
■ Open-close mould electronic ruler control
■ Mechanical safety device
■ Multi stage of mold open/close speed, pressure and position
■ Fast mold close
■ Automatic mold height adjustment
■ Low pressure mold-adjustment function
■ Box model platen: T slots
■ Auto centralized lubrication system
| ||Machine Type||Unit||TC-1200|
|INJECTION SYSTEM||Screw Diameter||mm||46|
|Theoretical Injection Volume||cm³||365|
|Number Of Temperature Control||zone||4(+1)|
|CLAMPING SYSTEM||Clamping Force||kn||1200|
|Top Platen Size||mm||950x575|
|Bottom Platen Size||mm||980x575|
|Sliding Platen Size||mm||1400x450|
|ELECTRIC HYDRAULIC SYSTEM||Max.Hydraulic Preesure||kgf/cm²||140|
|Oil Tank Capacity||L||430|
|Pump Motor Power||kw||15|
|Barrel Heating Power||kw||10.4|